Well, we are almost done sanding the 1st coat of primer. The rate of time spent is something close to this: 1 person, 2 hours, 1 maybe 2 square foot of sanding. See where this is going? We have about 2 square feet left on this coat, then we get to fill in the low spots, then prime again. We then get the lovely pleasure of sanding yet again, although this coat should sand a bit faster. less than 2 weeks to go, and I am gone for one of those! This does give Jim the time to pull some late nights on it though.  Depending on what this next coat looks like, it might just get a final coat of primer, and call it good for the rest of the season. Then to the reassembling everything. Remember, at this point, there is nothing in/on the boat. The fuel cell is under the decks and that is it. So all the cable's and wiring, motor, wings, lids, cowling, skid fin.....yadda yadda yadda. You get the idea!  So I will try to post some pics as for what it looks like right now, I will take them after this next coat goes on........